| 2 min read

What Happens if You Don't Continually Monitor Your Adhesion Process?

When a material begins its journey through a manufacturing process it becomes crucial to know and control everything that happens to that material as it makes its way down the line. There are two major factors to consider when understanding and controlling what happens to the surface of that material: the actual physical space of the warehouse and the time it takes to get through the entire process of being bonded, coated, painted, sealed, glued or printed. If you don't know precisely what is occurring at each Critical Control Point and you don't continually monitor the surface throughout the duration of the process, you could be trending towards adhesion failure and not even know it.

The first factor to consider is fairly logical. Every manufacturing process has many points along the way where the surface state of the material is altered in one way or another. Often these points are where an ultrasonic parts cleaner, atmospheric plasma treatment, abrading step or other cleaning and surface activation steps come into play. More often than not manufacturers will implement these steps and then not consider how they may degrade over time.

Take, for instance, a parts washer that seems to be getting the surfaces clean. How do you know when its truly the proper time to change the solvents and degreasers? If a quantifiable measurement goal were established before and after the parts washing phase you could clean to the number and know immediately when the solvents have passed the point of needing to be changed.

In order to ensure that your cleaning and surface activation steps are properly preparing the material surface a measurement of the surface state needs to be taken before and after each of these Critical Control Points and then taken again every time those steps are taken. This review will stop problems before they start saving immense amounts of time and money for manufacturers.

The second factor, time, is intrinsically linked to the first. Just like cleaning machinery cannot be expected to maintain absolute consistency without close monitoring, the actual surface of the material can go through massive changes over time when no one is looking.

It is likely that when a material arrives at a manufacturing space it has spent time elsewhere, like an OEM, not to mention on the vehicle that delivered it. This time outside of the manufacturer's control needs to be measured with a number so the first step is not a shot in the dark, hoping that all materials enter the process at the same level of cleanliness.

Similarly, if there is ever a portion of a material's life where it is in storage then it is crucial to understand what changes that surface has undergone while waiting on a shelf. The previous treatment most likely degraded over that time and unforeseen contaminants in the storage area could have come into contact with the material. All of this can be prevented by continual monitoring with a quantitative measurement.

Contact us using the form below to inquire about a process walk so we can help you begin taking control of your adhesion process and eliminating waste.