In 2014, a large manufacturer of automotive exteriors and interiors encountered a problem consistently adhering paint to their dashboards due to an inappropriate use of their flame treatment.
Flame treatment is a popular and notable procedure that can successfully modify the surface chemistry of a polymer, readying it for adhesion. Although flame treatment is an effective solution, determining the amount of treatment can be a delicate procedure. The over-flaming of these highly sensitive polymers can lead to polymer reorientation due to localized melting and ultimately, destruction of the surface.
In this case, however, the manufacturer was not utilizing flame treatment to monitor their surface cleanliness. Instead, they used it to deflash excess material on the edges of their dash boards. The edges of the dashboard were being over-flamed, hindering the polymer’s surface adhesion ability. This, in turn restricted paint from correctly adhering to the edges of the dashboard. The company needed a way to determine the appropriate amount of flame treatment.
At the time, the company enlisted dyne inks for their surface cleanliness tests. However, their low energy polymer was outside of the dyne ink range and because dyne inks are destructive, the manufacturer’s parts were damaged during the testing process.
BTG Labs got involved and quickly assessed the problem and fixed the issue. Collaboratively, a method was developed to determine appropriate flame treatment for optimal surface cleanliness. The surface was measured before and after flame treatments, then paint was applied to the surface, and a paint peel test was performed to determine the surface’s adhesive ability to the paint under different flaming treatments. They adjusted their flaming process by flaming closer, further, faster, or slower to the surface of the dashboard.
Because of these tests, and use of the Surface Analyst, the manufacturer was able to determine the desired surface cleanliness parameters and appropriate flame treatment process. With the suitable flame treatment process resolved, the surface regained the ability to adhere to the paint. Not only did the Surface Analyst provide more accurate testing, it decreased the amount of wasted materials by $230,000 that dyne inks caused in the destruction to tested materials.
The Surface Analyst provided a fast, easy, accurate, and nondestructive way to monitor surface cleanliness. The manufacturer replaced their dyne ink methods with the Surface Analyst and use it successfully to this day. The company now obtains precision measurements, decreases amount of waste, and collects accurate and quantitative data.
Read more case studies on the Surface Analyst in the technical resources section.