Partnering with Plastics Technology, BTG Labs held a webinar about a topic that’s attracting a lot of attention.
Material Science, News & Events, Adhesion Process, Film & Flexible Packaging, Surface Treatment, Product, Medical Device, Webinar, Thermoplastics, Surface Preparation, Surface Preparation & Treatment, Surface Testing
September 2018 | Pierce Geary
Partnering with Plastics Technology, BTG Labs held a webinar about a topic that’s attracting a lot of attention.
Partnering with Plastics Technology, BTG Labs held a webinar about a topic that’s attracting a lot of attention.
Read MoreMaterial Science, News & Events, Adhesion Process, Aerospace
July 2018 | Hunter Brankamp
10 Minutes to Fix your Manufacturing Operations
What could happen in 10 minutes?
Well, if you work to improve a manufacturing operation, you know that means quite a bit...
10 Minutes to Fix your Manufacturing Operations
What could happen in 10 minutes?
Well, if you work to improve a manufacturing operation, you know that means quite a bit...
Read MoreMaterial Science, News & Events, Adhesion Process, Aerospace, Surface Treatment
May 2018 | Hunter Brankamp
On May 21-24, BTG Labs heads back to Long Beach, CA but this time for the SAMPE 2018 Conference & Exhibition.
Recently in Long Beach for AeroDef, one of the aerospace and defense industries’ most...
On May 21-24, BTG Labs heads back to Long Beach, CA but this time for the SAMPE 2018 Conference & Exhibition.
Recently in Long Beach for AeroDef, one of the aerospace and defense industries’ most widely recognized conferences, BTG Labs now contributes to this tradeshow that features “the latest technologies and research advancements in the...
Read MoreMarch 2018 | Hunter Brankamp
At the end of this month, an opportunity that comes only once a year will be coming to the AeroDef Manufacturing Conference, March 26-29 in Huntington, CA.
At the end of this month, an opportunity that comes only once a year will be coming to the AeroDef Manufacturing Conference, March 26-29 in Huntington, CA.
Read MoreFebruary 2018 | Hunter Brankamp
On Friday, February 2nd, current University of Cincinnati materials science & engineering graduate students and faculty will have the opportunity to hear one of their fellow alumni speak.
On Friday, February 2nd, current University of Cincinnati materials science & engineering graduate students and faculty will have the opportunity to hear one of their fellow alumni speak.
Read MoreJanuary 2018 | Hunter Brankamp
Image above: Our President, Tom McLean and founder Giles Dillingham sharing in the joy of this past holiday season.
Image above: Our President, Tom McLean and founder Giles Dillingham sharing in the joy of this past holiday season.
Read MoreDecember 2017 | Emily Walsh
The BTG Labs team dressed in their holiday best to celebrate another successful year
During this holiday season, BTG Labs reflects on another great year.
In 2017, the team grew by 53%,...
The BTG Labs team dressed in their holiday best to celebrate another successful year
During this holiday season, BTG Labs reflects on another great year.
In 2017, the team grew by 53%, expanding almost every department with new, talented members.
Throughout the year, BTG Labs has kept busy, traveling coast to coast for trade shows and...
Read MoreMaterial Science, News & Events, Product
December 2017 | Emily Walsh
Last week, BTG Labs exhibited and presented at the largest composites show and conference: CAMX 2017. Despite a set-back due to Hurricane Irma, causing the date to be rescheduled from September to...
Last week, BTG Labs exhibited and presented at the largest composites show and conference: CAMX 2017. Despite a set-back due to Hurricane Irma, causing the date to be rescheduled from September to December, the show attracted a large turn out with hundreds of industry specialists to exchange the latest in composite innovation.
As manufacturers...
Read MoreMaterial Science, News & Events, Adhesion Process, Aerospace, Renewable Energy, Surface Treatment, Product
December 2017 | Christian Meininger
BTG Labs will exhibit at CAMX 2017, The Composites and Advanced Materials Expo, which will run December 11-14 in Orlando, FL. BTG Labs will host booth N17. Visit our booth for live demonstrations...
BTG Labs will exhibit at CAMX 2017, The Composites and Advanced Materials Expo, which will run December 11-14 in Orlando, FL. BTG Labs will host booth N17. Visit our booth for live demonstrations of the Surface Analyst.
BTG Labs' CEO and Chief Scientist Dr. Giles Dillingham will give a presentation entitled “Rapid Development of Surface...
Read MoreMaterial Science, News & Events, Adhesion Process, Surface Treatment, Product, Composites, Surface Preparation, Surface Preparation & Treatment, Surface Testing
December 2017 | Emily Walsh
Manufacturing a product to withstand the environmental stresses of wind, rain, and sediment is challenging enough. But, when you add saltwater and wave action to the mix, the detrimental threat of...
Manufacturing a product to withstand the environmental stresses of wind, rain, and sediment is challenging enough. But, when you add saltwater and wave action to the mix, the detrimental threat of corrosion increases significantly. A coating adhesion test is important for quickly testing a surface before spending hours of work, coating and...
Read MoreMaterial Science, News & Events, Adhesion Process, Automotive, Surface Treatment, Product, Composites, Surface Preparation, Surface Preparation & Treatment, Surface Testing
November 2017 | Emily Walsh
Watch BTG Labs’ latest video and learn how to gain total surface quality control with surface preparation with the push of a button. This video offers a way to better understand and optimize...
Watch BTG Labs’ latest video and learn how to gain total surface quality control with surface preparation with the push of a button. This video offers a way to better understand and optimize control of critical surface processes, ultimately giving manufacturers the ability to engineer a stronger product.
The video features Lead Sales Engineer...
Read MoreEvery adhesion problem is unique. The path to understanding your solution will be too. It all starts with us walking your production line to identify your Critical Control Points that affect adhesion; the first step in constructing your Adhesion Process Roadmap to diagnose the root cause of failures
Register+513.469.1800
5129 Kieley Place
St. Bernard, OH 45217