Webinar: Reliable Adhesion Success Through Process Control

Pierce Geary

Join Dr. Giles Dillingham Thursday June 13th at 2 p.m. U.S. EDT for a webinar titled: "Uncovering Non-Obvious Variables in Surface Preparation Processes for Bonding and Coating". 

Register today for the webinar being presented by Tech Briefs and BTG Labs. tb-logo

About the webinar:

Surface preparation for aerospace, automotive and medical device bonding and coating operations include manual and automated processes which frequently include some combination of solvent wiping and abrasion, among other uncontrolled preparation methods such as ultrasonic parts washing and plasma treatment. These processes can be very effective if implemented with proper process control feedbacks. 

However, recent experience with bonding and coating operations across a range of industries has revealed that processes that were successfully demonstrated in a materials and process laboratory don’t always translate into reliable and repeatable processes in manufacturing. Root cause analysis has shown that this usually stems directly from a lack of knowledge of all of the variables that can affect the success of a surface preparation process.

Process variables that are not identified cannot be measured and controlled. 

This webinar presents a compendium of variables that have been uncovered during failure analysis of common bonding operations, and shows how awareness of these variables permits implementation of simple process control steps that significantly increase bond reliability.

Register today and find out where the variables that are affecting adhesion success can be located and then controlled.

Comments